Back to top
8 in stock

Yorktown Collection

The Yorktown Flush Mount Lantern was inspired by the architecture of Colonial Williamsburg. Its smaller size and low profi le makes it a good choice for small spaces where you want to make a big impact. The Yorktown collection coordinates beautifully with our CopperSmith Somerset and Market Street English collections.

Please view your available mount and accessory options using the drop-down below. For more information, click on the How to Order Button Below.


The Yorktown Collection is a stylish lantern design offered in 2 sizes. Available as a Wall Mount only.

Sizes & Basic Specifications







16" x 9 1/4"

6 1/2"

Single Burner

2-60W Candles


18 3/4" x 10"

7 1/4"

Single Burner

2-60W Candles

Line Drawings

Yorktown 16        Yorktown 19

Installation Instructions

Important Information to Read Before Installation of The CopperSmith Lanterns

>> For Wall Mount gas lanterns, the gas line will come directly out of the bottom at a 90-degree angle straight into the wall.

>> Pier Mount and Post Fitter lanterns will have a valve that comes straight from the bottom of the lantern into the column or post.

>> Classic Yoke mount lanterns will have a gas line that runs through the lantern, clipped to the inside of the yoke, and up through the down rod.

>> The gas line does not come out of the mount or back-plate. Please use 1/4″ flexible copper tubing. Always check before roughing in your gas line for installation as position changes with the type of mount.

>> For electric lights and gas lanterns with electronic igniters, the wiring will come out of the back-plate indicated on the drawing.

>> All electronic igniters operate on 120V.

>> All-electric lanterns will have a black tube that encases the wiring from the bottom of the lantern to the mount or back-plate. This does not include any lantern with a Turtle Light Adapter.

>> The mounting plate for all standard wall mount lanterns is 5”(H) x 6”(W) x 1“(D).

>> Flush Mount (direct to the wall without a backplate) lanterns have one hole in the back that will be used to mount.

>> Do not mount to any flammable or heat-sensitive materials.