Back to top
Share
8 in stock

Belmont Collection

Belmont is a large, graceful design perfect for large homes and commercial buildings. Belmont is standard with the lovely Top & Bottom London finials as shown.

Please view your available mount and accessory options using the drop-down below. For more information, click on the How to Order Button Below.

 

HOW TO ORDER

The Belmont Collection is a large lantern design offered in 3 sizes. Available as a Wall Mount, Ceiling Mount, and with Post and Pier Mounts.

Sizes & Basic Specifications

MODEL

DIMENSIONS

EXTENSION

GAS

ELECTRIC

BM30

10 1/2" x 30"

12"

Single Burner

2-60W Candles

BM35

12" x 37"

14"

Single Burner

2-60W Candles

BM40

15 1/2" x 42"

17"

Single Burner

3-60W Candles

Line Drawings

Belmont 30        Belmont 35        Belmont 40 

Installation Instructions

Important Information to Read Before Installation of The CopperSmith Lanterns

>> For Wall Mount gas lanterns, the gas line will come directly out of the bottom at a 90-degree angle straight into the wall.

>> Pier Mount and Post Fitter lanterns will have a valve that comes straight from the bottom of the lantern into the column or post.

>> Classic Yoke mount lanterns will have a gas line that runs through the lantern, clipped to the inside of the yoke, and up through the down rod.

>> The gas line does not come out of the mount or back-plate. Please use 1/4″ flexible copper tubing. Always check before roughing in your gas line for installation as position changes with the type of mount.

>> For electric lights and gas lanterns with electronic igniters, the wiring will come out of the back-plate indicated on the drawing.

>> All electronic igniters operate on 120V.

>> All-electric lanterns will have a black tube that encases the wiring from the bottom of the lantern to the mount or back-plate. This does not include any lantern with a Turtle Light Adapter.

>> The mounting plate for all standard wall mount lanterns is 5”(H) x 6”(W) x 1“(D).

>> Flush Mount (direct to the wall without a backplate) lanterns have one hole in the back that will be used to mount.

>> Do not mount to any flammable or heat-sensitive materials.